This is an S-Video 1-to-4 Distribution Amplifier. Note: If you attempt to split an S-Video signal with a passive splitter one or all monitors may get darker and the colors will also degrade. Our active S-video distribution amplifiers will solve the signal loss that occurs with passive splitters. This 1-to-4 S-Video Distribution Amplifier provides one input and four outputs set to unity gain. In addition, the 12VAC wall transformer provides isolated power to control ground loops. INPUT: The input consist of one 4-pin mini-DIN connector. A video signal with excessive DC component (or offset) such as those generated by many computer video boards will cause the unit to malfunction. The 1 Volt-peak-to-peak signal needs to be within the -1V to +1V. Ideally, the video signal's blanking level should be clamped at 0 volts, although an AC coupled signal is also acceptable. OUTPUTS: The unit provides four S-video outputs consisting of four 4-pin mini-DIN connectors. Each output is set to unity gain. Unused outputs do not need to be terminted for proper operation of the S-video distribution amplifier. Specifications: - Frequency Response: DC - 200 MHz @ -3dB (i Vpp input signal) - Input Signal Level: 0.5- 2.0Vpp (within -1V to +1 V range from ground) - Input Configuration: Standard (75 Ohms) - Input Coupling: DC - Input Connectors: One 4-pin Mini-DIN - Output Connectors: Four 4-pin Mini-DIN - Gain: Unity - Output Series Impedance: 75 Ohms - Mounting: Two threaded 6-32 inserts - Power Supply: 12V AC wall transformer (included) - Power Connector Type: P5 Connector - Power Status: Power LED indicator - Operating Temperature: -40°C to 50°C - Operating Humidity: 0% - 95% - Dimensions: 2.2" x 4.4" x 0.65"; 56mm x 112mm x 17mm (Epoxy only without connectors) - Shipping Weight: 2 lbs (includes wall transformer Availability: Ships same day. |